This category includes Validation and Qualification related sops of pharmaceutical plant
Standard Operating Procedure (SOP) and format/Protocol of HPLC system calibration as per newly released Indian Pharmacopoeia (IP) recommendations. This Procedure is applicable for Shimadzu make HPLC and UPLC Systems, Agilent make HPLC Systems, Thermo make UHPLC & UPLC, Waters make HPLC Systems etc. HPLC Calibration Parameters are - Flow rate accuracy - HPLC Pump Calibration Temperature accuracy of HPLC column…
Cleaning is a crucial step in the manufacturing of pharmaceutical products, and it is essential to validate that the equipment is cleaned thoroughly. In identifying products for cleaning validation, worst-case identification is essential as well. Identification of Worst Case in Cleaning Validation Cleaning validation for every product produced in the facility is not feasible. As a result, products are chosen…
Calibration Policy/SOP - Instrument calibration is one of the primary processes used to maintain instrument accuracy. Calibration is the process of configuring an instrument to provide a result for a sample within an acceptable range. Policy - Calibration of Instrument & Equipment 1.0 OBJECTIVE To define the policy for calibration of all master instruments and measuring devices used for measuring, monitoring…
A media fill is the performance of an aseptic manufacturing procedure using a sterile microbiological growth medium, in place of the drug solution, to test whether the aseptic procedures are adequate to prevent contamination during actual drug production. Media Fill Validation / Aseptic Process Simulation 1.0 OBJECTIVE To lay down the procedure to challenge the aseptic techniques used for sterile…
Standard Operating Procedure (SOP) for Handling of Data Integrity Incident Investigation and compliance in Pharmaceutical Drug Manufacturing Plant. Handling of Data Integrity Incident 1.0 PURPOSE: To provide a procedure to investigate and handle data integrity incidences related to GXP data, identified during internal audit or during review of data. 2.0 SCOPE: Applicable to all GxP data generated by electronic and…
Standard Operating Procedure (SOP) and Protocol for Transport Validation through temperature mapping during transit of drug products. Transport Validation Procedure 1.0 Objective To lay down the procedure for conducting transport validation and to describe acceptance criteria for the study. The purpose of this SOP is to provide detailed steps to conduct transport validation and to evaluate the product integrity and…
Documents and Data Control is a function or department which keeps track of all documentation, specifications, and processes. The purpose is to ensure that everyone uses the correct and current document processes and specifications. Documents and Data Control 1.0 Objective To lay down a procedure for control of documents and documented data. 2.0 Scope This SOP is applicable for the…
Equipment Qualification is the final series of inspections and tests to ensure that critical requirements necessary for related product quality are satisfied and that documents and procedures necessary to properly operate and maintain the system are in place. Equipment Qualification Procedure 1.0 Objective : To lay down the procedure for preparation of Qualification documents, execution of Qualification activities, Review and…
Vendor Audit is an evaluation of vendor's manufacturing site, for product of interest(s), for the understanding and application of the cGMP. Successful evaluation of Vendor’s ability and capability in meeting the company’s quality system requirements in relation to the criteria established for the material being sourced. Vendor Audit and Qualification Guideline 1.0 Objective : To lay down a procedure for…
Standard Operating Procedure (SOP) for Management of Walk in and stand-alone Stability Chamber used for Stability Study and also to determine the self life of the drug product. Stability Chamber / Incubators Management 1.0 Objective : To lay down a procedure for Management of Walk in and stand-alone Stability Chamber. 2.0 Scope : This SOP is applicable for Management of…
Standard operating Procedure & Protocol for Cleaning Validation to prove that the equipment cleaning procedure can repeatedly and reproducibly remove residue of the previous product below established acceptance limit. The acceptance limit is maximum allowable quantity of product residue, which does not affect quality and safety of the subsequent product to be manufactured, by using same equipment and facility. Cleaning…
Standard Operating Procedure for performing analytical method verification of compendial procedure/ validated analytical methods in quality control department. Describes characteristics for analytical method verification to be carried out for drug substances and drug products. Analytical Method Verification 1.0 Objective : To lay down the procedure for performance of analytical method verification of compendial procedure/validated analytical methods in quality control department.…
This SOP describes the process and requirements for the transfer of analytical test method from an originating laboratory (Transferring Unit) to a receiving laboratory (Receiving Unit). This SOP provides the requirements for the transfer of validated analytical methods. It defines a process for preparing for transfer, executing transfer testing and preparing final reports. Analytical Method Transfer 1.0 PURPOSE: This SOP…
Standard Operation Procedure (SOP) of providing training and qualification of analyst for all new appointed personnel, and existing employees who are responsible for sampling & testing of incoming materials, in process samples and finished products. Analyst Qualification Procedure 1.0 Objective : To lay down a procedure of providing training and qualification of analyst for all new appointed personnel, and existing…
Guideline for Laboratory Standard Management (Preparation, Qualification and Handling of Analytical standards/Working Standard/Primary Standard etc.) Working Standard Management 1.0 Objective : To lay down a procedure for the Preparation, Qualification and Handling of Analytical standards (Working Standard, Reference Standard & Primary Standards). 2.0 Scope : This SOP is applicable in Quality Control for the Preparation, Qualification and Handling of Analytical…
Standard Operating Procedure (SOP) and Guideline for Preservative Efficacy Test in Microbiology Laboratory for checking of effectiveness of preservatives added in the drug formulations. Procedure for Preservative Efficacy Test 1.0 Objective : To lay down a procedure for preservative efficacy test. 2.0 Scope : This guideline is applicable in Microbiology Laboratory for checking of effectiveness of preservatives added in the…
Standard Operating Procedure and Guideline for New Product Introduction in existing set of product list and equipment trail and Quality Risk Management at Pharmaceuticals Drug Manufacturing Plant. Guideline for Introduction of Product 1.0 Objective : To lay down the procedure for introduction of new product at the manufacturing location. 2.0 Scope : This guideline is applicable for Introduction of new…
Guideline for Technology Transfer. Tech Transfer is a systematic procedure that contains the transfer of any process together with its documentation and professional expertise between development and manufacture or between manufacture sites to produce similar quality products. It is a systematic procedure that is followed in order to pass the documented knowledge and experience gained during development and or commercialization…
Standard Operating Procedure (SOP) & Guideline for Quality Risk Management (QRM) i.e. risk identification, analysis, evaluation, reduction/ mitigation, communication and conclusion of risk in order to ensure the quality, safety, integrity and purity (SISPQ) of the drug product. Quality Risk Management (QRM) 1.0 Objective : To lay down the procedure for risk identification, analysis, evaluation, reduction/ mitigation, communication and conclusion…
Standard Operating Procedure (SOP) and Guideline for performing Cleaning Validation (CV) of drug product manufacturing equipments. Cleaning Validation (CV) 1.0 Objective : To lay down the procedure for Cleaning Validation (CV) of manufacturing equipments. This Guideline describes the validation of cleaning procedures (CV) for the removal of contaminants associated with the previous products, residues of cleaning agents as well as…